In the beginning, personal computers used cassette tape drives. Then came floppy drives, followed by hard drives. And then came removable media drives such as SyQuest, Bernoulli, and – perhaps best know of all – Zip.
Iomega had made a name for itself with its Bernoulli Box, a lower cost alternative to SyQuest drives with their hard disk platters. SyQuest had established itself with a 44 MB 5-1/4″ cartridge drive system using the same 130mm platters found in hard drives.
Windows uses NTFS and Mac OS uses HFS and they're incompatible with each other. However, you can format the drive to work with both Windows and Mac by using the exFAT filesystem. Press Windows logo key + E to open File Explorer. Right-click on the drive you want to format, click on Format. Under File system box, select exFAT for this drive. Then click Start button to.
By contrast, Bernoulli cartridges had a floppy disk spinning at 3,000 rpm, using the Bernoulli Principle to pull the disk’s surface toward the read-write head. Unfortunately, the original Bernoulli cartridge system used huge media, measuring about 8″ x 11″ (210 x 275 mm).
Bernoulli Box II used a smaller cartridge along with a drive that fit in a standard 5-1/4″ bay. Bernoulli drives were noted for their reliability, and they came in many different capacities.
Although Apple wasn’t the first to use 3.5″ floppy disks, it was the first to standardize on them instead of the older, larger 5-1/4″ floppies. In the PC world, single-sided 3.5″ floppies held 360 KB of data, double-sided disks 720 KB. On Macs, the same disks stored 400 KB and 800 KB respectively.
High-density (HD) 3.5″ floppies arrived in 1987, and both PCs and Macs used them to store 1.4 MB of information. The same year IBM introduced its DSED (Double Sided Extended Density) 2.88 MB floppy drive and disks, which never caught on. The market needed a removable media drive with more capacity than floppies but at a much better price than SyQuest.
Iomega brought its Zip drive and Zip disks to market in March 1995 with 100 MB capacity. Zip uses a cartridge a little larger and somewhat thicker than a 3.5″ floppy disk. It was also far faster than a floppy drive, which is part of what kept the competing LS-120 SuperDisk from catching on – it had higher capacity than Zip but was far, far slower. (Interestingly, SuperDisk began as an Iomega project that they ditched in favor of Zip. 3M acquired the technology from Iomega and brought it to market.)
With their relatively high capacity and low price (initially $20 per cartridge), Zip took off, selling nearly one million in 1995. A few Zip disks could back up most hard drives in 1995; one Zip disk could hold a bootable system plus diagnostics. Zip was also a great way to send files out to a service bureau.
Zip disks came preformatted for Macs or PCs, and either could be reformatted for the other platform using Iomega Tools.
The SCSI Zip drive allows you to choose one of two possible SCSI IDs, 5 or 6. SCSI ID 6 is rock solid, but SCSI ID 5 can have issues when other devices on the SCSI bus are moving a lot of data. Avoid using SCSI ID 5 if at all possible.
In 2013, Lui Gough tested several different types of Zip drives on his AMD Sempton 3300+ powered PC running Windows XP SP3. Here are the average and maximum transfer rates by drive mechanism:
Cam Giesbrecht ran benchmark tests on his Mac Quadra 605, also comparing HD floppy and hard drive performance. His results:
The SCSI Zip drive performs better on this Mac and the one tested by Lui Gough on his Windows PC, in part because Macs were optimized for SCSI drives in those days while PCs were optimized for ATA drives. The Zip shows itself to be a decent backup medium, writing data at 70-80% of the write speed of the two tested hard drives.
As for the floppy, there is no comparison. Zip stores 70x as much data and runs about 15x as fast.
Finally, the Iomega Zip FAQ benchmarks Zip 100, SyQuest 44 (an older technology), and the hard drive in a 1989 Mac IIci, obtaining these results:
This seems to be comparing a 1989 vintage hard drive with two removable media options. Even an older hard drive outperforms Zip 100 and SyQuest 44 for random reads and writes, but the big surprise is that for 256 KB sequential reads, Zip beats the hard drive, while it takes a close second for 256 KB sequential writes, just behind the older hard drive.
Overall Zip had decent performance, especially compared to older hard drives. With contemporary mid-1990s hard drives, Zip would fall further behind yet still acquit itself nicely.
As long as Iomega kept things simple, Zip continued to grow and grow. It supported most operating system of that era:
Later versions of Zip supported 250 MB (launched December 1998) and 750 MB (August 2002) of storage. Zip drive sales began their decline in 1999 as CD-R and DVD-R grew in popularity, followed by the explosion in USB thumb drives.
Zip drives were available in numerous interfaces, including:
There were also three later implementations:
With each additional Zip format, Iomega further muddied the waters. It was simple when every Zip disk stored 100 MB and every Zip drive could read and write to it.
Zip 250 drives can read and write both Zip 100 and Zip 250 disks, although they write to Zip 100 disks very slowly. Zip 100 drives automatically eject Zip 250 disks as unreadable.
Zip 750 drives can read Zip 100 disks but not write to them at all. It is fully compatible with Zip 250 disks. Zip 100 and Zip 250 drives will eject a Zip 750 drive as unreadable.
And you receive the exact same EBay Buyer Protection. The seller(me) sees only the last 4 digit.
Interestingly, Zip was listed as one of the 25 worst technology products (#15) by PCWorld in 2006 – and one of the 50 best (#23) in 2007!
Iomega was acquired by EMC in June 2008, making it part of the world’s largest storage company. EMC and Lenovo partnered in 2013 to create LenovoEMC, which took over Iomega’s business.
* No, it isn’t a typo. Compleat is a legitimate, albeit archaic, spelling for complete. As Kenneth G. Wilson says in The Columbia Guide to Standard American English: “This obsolete spelling of the adjective complete suggests an air of antiquity that seems to please some of those who name things….” We find that fitting for Low End Mac’s Compleat Guides to “obsolete” hardware and software.
Keywords: #zipdrive #zipdisk #iomegazip
Short link: http://goo.gl/JZA9SU
searchword: compleatzip
Have you ever ran into a problem where you’re trying to use a flash drive on both Windows and Mac? Here’s how to correctly format the drive to work on both.
Compatibility between OS X and Windows have never been better. Both use many of the same industry standards and technologies providing greater ease for users of both platforms. Examples of the increased compatibility include Boot Camp software for running Windows on a Mac and the Microsoft Office productivity suite. Unfortunately, both still maintain some legacy standards that don’t play nice with each other.
OS X uses the HFS+ file system, while Windows uses the NTFS file system that shares little in common. This makes it difficult to move data between the two unless you have them networked together. If you’re working in a mixed environment, where you might need to work on files between both systems, a handy solution is to use a thumb drive. Before you start, though, make sure your thumb drive is formatted so it can work on both Windows and OS X.
On Windows, connect your thumb drive. Click Start > File Explorer > This PC. Right-click your flash drive and then select Format.
In the File System list box, choose exFAT, type in a Volume Label if you want, and then click Start.
Click OK to the format warning and wait until the process is complete.
If you only use a Mac computer, you can format your thumb drive so it can work on Windows systems.
Connect the thumb drive to your Mac. Launch Disk Utility, press Command+Space then type:disk utility. Select your thumb drive in the Disk Utility window then click the Erase tab. In the Format list box select ExFAT, enter a Volume Label if you want, then click Erase.
Now you’ll be able to save and copy files to your thumb drive on both Windows and OS X.
Microsoft introduced exFAT in 2006; it’s an optimized version of FAT providing better performance advantages over FAT32. It is also widely supported by memory storage technology companies and third-party operating systems like OS X and Linux.
In the beginning, personal computers used cassette tape drives. Then came floppy drives, followed by hard drives. And then came removable media drives such as SyQuest, Bernoulli, and – perhaps best know of all – Zip.
Iomega had made a name for itself with its Bernoulli Box, a lower cost alternative to SyQuest drives with their hard disk platters. SyQuest had established itself with a 44 MB 5-1/4″ cartridge drive system using the same 130mm platters found in hard drives.
Windows uses NTFS and Mac OS uses HFS and they're incompatible with each other. However, you can format the drive to work with both Windows and Mac by using the exFAT filesystem. Press Windows logo key + E to open File Explorer. Right-click on the drive you want to format, click on Format. Under File system box, select exFAT for this drive. Then click Start button to.
By contrast, Bernoulli cartridges had a floppy disk spinning at 3,000 rpm, using the Bernoulli Principle to pull the disk’s surface toward the read-write head. Unfortunately, the original Bernoulli cartridge system used huge media, measuring about 8″ x 11″ (210 x 275 mm).
Bernoulli Box II used a smaller cartridge along with a drive that fit in a standard 5-1/4″ bay. Bernoulli drives were noted for their reliability, and they came in many different capacities.
Although Apple wasn’t the first to use 3.5″ floppy disks, it was the first to standardize on them instead of the older, larger 5-1/4″ floppies. In the PC world, single-sided 3.5″ floppies held 360 KB of data, double-sided disks 720 KB. On Macs, the same disks stored 400 KB and 800 KB respectively.
High-density (HD) 3.5″ floppies arrived in 1987, and both PCs and Macs used them to store 1.4 MB of information. The same year IBM introduced its DSED (Double Sided Extended Density) 2.88 MB floppy drive and disks, which never caught on. The market needed a removable media drive with more capacity than floppies but at a much better price than SyQuest.
Iomega brought its Zip drive and Zip disks to market in March 1995 with 100 MB capacity. Zip uses a cartridge a little larger and somewhat thicker than a 3.5″ floppy disk. It was also far faster than a floppy drive, which is part of what kept the competing LS-120 SuperDisk from catching on – it had higher capacity than Zip but was far, far slower. (Interestingly, SuperDisk began as an Iomega project that they ditched in favor of Zip. 3M acquired the technology from Iomega and brought it to market.)
With their relatively high capacity and low price (initially $20 per cartridge), Zip took off, selling nearly one million in 1995. A few Zip disks could back up most hard drives in 1995; one Zip disk could hold a bootable system plus diagnostics. Zip was also a great way to send files out to a service bureau.
Zip disks came preformatted for Macs or PCs, and either could be reformatted for the other platform using Iomega Tools.
The SCSI Zip drive allows you to choose one of two possible SCSI IDs, 5 or 6. SCSI ID 6 is rock solid, but SCSI ID 5 can have issues when other devices on the SCSI bus are moving a lot of data. Avoid using SCSI ID 5 if at all possible.
In 2013, Lui Gough tested several different types of Zip drives on his AMD Sempton 3300+ powered PC running Windows XP SP3. Here are the average and maximum transfer rates by drive mechanism:
Cam Giesbrecht ran benchmark tests on his Mac Quadra 605, also comparing HD floppy and hard drive performance. His results:
The SCSI Zip drive performs better on this Mac and the one tested by Lui Gough on his Windows PC, in part because Macs were optimized for SCSI drives in those days while PCs were optimized for ATA drives. The Zip shows itself to be a decent backup medium, writing data at 70-80% of the write speed of the two tested hard drives.
As for the floppy, there is no comparison. Zip stores 70x as much data and runs about 15x as fast.
Finally, the Iomega Zip FAQ benchmarks Zip 100, SyQuest 44 (an older technology), and the hard drive in a 1989 Mac IIci, obtaining these results:
This seems to be comparing a 1989 vintage hard drive with two removable media options. Even an older hard drive outperforms Zip 100 and SyQuest 44 for random reads and writes, but the big surprise is that for 256 KB sequential reads, Zip beats the hard drive, while it takes a close second for 256 KB sequential writes, just behind the older hard drive.
Overall Zip had decent performance, especially compared to older hard drives. With contemporary mid-1990s hard drives, Zip would fall further behind yet still acquit itself nicely.
As long as Iomega kept things simple, Zip continued to grow and grow. It supported most operating system of that era:
Later versions of Zip supported 250 MB (launched December 1998) and 750 MB (August 2002) of storage. Zip drive sales began their decline in 1999 as CD-R and DVD-R grew in popularity, followed by the explosion in USB thumb drives.
Zip drives were available in numerous interfaces, including:
There were also three later implementations:
With each additional Zip format, Iomega further muddied the waters. It was simple when every Zip disk stored 100 MB and every Zip drive could read and write to it.
Zip 250 drives can read and write both Zip 100 and Zip 250 disks, although they write to Zip 100 disks very slowly. Zip 100 drives automatically eject Zip 250 disks as unreadable.
Zip 750 drives can read Zip 100 disks but not write to them at all. It is fully compatible with Zip 250 disks. Zip 100 and Zip 250 drives will eject a Zip 750 drive as unreadable.
And you receive the exact same EBay Buyer Protection. The seller(me) sees only the last 4 digit.
Interestingly, Zip was listed as one of the 25 worst technology products (#15) by PCWorld in 2006 – and one of the 50 best (#23) in 2007!
Iomega was acquired by EMC in June 2008, making it part of the world’s largest storage company. EMC and Lenovo partnered in 2013 to create LenovoEMC, which took over Iomega’s business.
* No, it isn’t a typo. Compleat is a legitimate, albeit archaic, spelling for complete. As Kenneth G. Wilson says in The Columbia Guide to Standard American English: “This obsolete spelling of the adjective complete suggests an air of antiquity that seems to please some of those who name things….” We find that fitting for Low End Mac’s Compleat Guides to “obsolete” hardware and software.
Keywords: #zipdrive #zipdisk #iomegazip
Short link: http://goo.gl/JZA9SU
searchword: compleatzip
Have you ever ran into a problem where you’re trying to use a flash drive on both Windows and Mac? Here’s how to correctly format the drive to work on both.
Compatibility between OS X and Windows have never been better. Both use many of the same industry standards and technologies providing greater ease for users of both platforms. Examples of the increased compatibility include Boot Camp software for running Windows on a Mac and the Microsoft Office productivity suite. Unfortunately, both still maintain some legacy standards that don’t play nice with each other.
OS X uses the HFS+ file system, while Windows uses the NTFS file system that shares little in common. This makes it difficult to move data between the two unless you have them networked together. If you’re working in a mixed environment, where you might need to work on files between both systems, a handy solution is to use a thumb drive. Before you start, though, make sure your thumb drive is formatted so it can work on both Windows and OS X.
On Windows, connect your thumb drive. Click Start > File Explorer > This PC. Right-click your flash drive and then select Format.
In the File System list box, choose exFAT, type in a Volume Label if you want, and then click Start.
Click OK to the format warning and wait until the process is complete.
If you only use a Mac computer, you can format your thumb drive so it can work on Windows systems.
Connect the thumb drive to your Mac. Launch Disk Utility, press Command+Space then type:disk utility. Select your thumb drive in the Disk Utility window then click the Erase tab. In the Format list box select ExFAT, enter a Volume Label if you want, then click Erase.
Now you’ll be able to save and copy files to your thumb drive on both Windows and OS X.
Microsoft introduced exFAT in 2006; it’s an optimized version of FAT providing better performance advantages over FAT32. It is also widely supported by memory storage technology companies and third-party operating systems like OS X and Linux.